How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask walkereng Your Own Question

walkereng
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2376
Experience:  Over 30 years of Structural Engineering experience.
61772417
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

I'm constructing a mezzanine to hold up 5000 lbs I want to

Customer Question

I'm constructing a mezzanine to hold up 5000 lbs I want to know the min. size I beams and channel iron for floor stringers that I can use to support this weight.
JA: OK. Tell me a bit more about what's going on so we can help you best.
Customer: I'm going to store greases and main engine lube oils in 5 gallon pails
JA: Is there anything else important you think the Structural Engineer should know?
Customer: I'm going to weld these I beams between four vertical I beams already part of a structure the size of the mezzanine is about 12'x12'.
Submitted: 3 months ago.
Category: Structural Engineering
Expert:  walkereng replied 3 months ago.

I can help

Expert:  walkereng replied 3 months ago.

So the new floor beams will be welded to 4 existing steel beam columns that make a 12'x12' square?

Expert:  walkereng replied 3 months ago.

Let me know when you come back online

Expert:  walkereng replied 3 months ago.

I am still here to help if you need it.

Related Structural Engineering Questions