How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6681
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

I have a steel platform (10' x 10') with a 2200lb.

Customer Question

Hello,
I have a steel platform (10' x 10') with a 2200lb. compressor on it which is support by 5 steel columns. One on each corner and one in the center of the platform. I need to remove two corner columns and would like to install an I Beam to make room for another compressor on the main floor.
What size I-Beam do I need?
Submitted: 4 months ago.
Category: Structural Engineering
Expert:  walkereng replied 4 months ago.

I can help

Expert:  walkereng replied 4 months ago.

Do you have any pictures you can share with me?

Expert:  StructuralEng replied 4 months ago.
Hello. I can help
Expert:  StructuralEng replied 4 months ago.

Hello. Do you still need help with this?

Related Structural Engineering Questions