How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6689
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

What size beams are required if installed unsupported (ecept

Customer Question

What size beams are required if installed unsupported (ecept ends) , beam 1 to the left 107 inches from the wall to the right 145 inches from beam 2 . beam 2 to the left 145 inches from beam 1 to the right 152 inches from the side wall.
Both beams need to be 25 feet long.
Submitted: 5 months ago.
Category: Structural Engineering
Expert:  StructuralEng replied 5 months ago.
Hello
Expert:  StructuralEng replied 5 months ago.
I can help
Expert:  StructuralEng replied 5 months ago.
Are they supporting a single floor only or is there a bearing wall above them?
Expert:  StructuralEng replied 5 months ago.
Will they support any ceramic tile?
Customer: replied 5 months ago.
it is a garage , single floor no walls upstairs no tile . Seasonal storage and various car parts
Customer: replied 5 months ago.
I rather have text than speech it is easier to absorb
Customer: replied 5 months ago.
Are you still here ???
Expert:  StructuralEng replied 5 months ago.
I am here
Expert:  StructuralEng replied 5 months ago.
I will size it for an attic storage load
Expert:  StructuralEng replied 5 months ago.
You can plan for a W12x26 or W10x30 ASTM A992 Gr. 50

Related Structural Engineering Questions