How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6746
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

Remove a 22' load bearing wall; install a 22' (2"x12"/22')

Customer Question

Remove a 22' load bearing wall; install a 22' (2"x12"/22') beam in attic flush with ceiling.
The wall is mostly opened with a 14' beam below ceiling and a 8' wall with studs with a bookcase on one side and the Pantry and fridge on the other. A 7' raised bar is attached to the 8' wall. This wall separates the family room from the kitchen. I want to install an opened kitchen but I need that wall gone first.
Submitted: 6 months ago.
Category: Structural Engineering
Expert:  StructuralEng replied 6 months ago.
Hello
Expert:  StructuralEng replied 6 months ago.
I can help
Expert:  StructuralEng replied 6 months ago.
You want a 2x12 beam to spam 22'?

Related Structural Engineering Questions