How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6807
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

What type of LVL would be needed to span 33' ?

Customer Question

What type of LVL would be needed to span 33' ?
Submitted: 10 months ago.
Category: Structural Engineering
Customer: replied 10 months ago.
What type and size would an LVL Beam need to be to span 33'?
Customer: replied 10 months ago.
And do you provide any type of documentation of your rational and answer?
Expert:  StructuralEng replied 10 months ago.
Hello.
Expert:  StructuralEng replied 10 months ago.
I can provide the size. If you need documentation, I can provide detailed calculations as an additional service
Expert:  StructuralEng replied 10 months ago.
What is the beam supporting?
Customer: replied 10 months ago.
The walls are load bearing supporting the ridge of the roof system
Expert:  StructuralEng replied 10 months ago.
Thank you. Is it supporting the roof only? No attic and not the second floor?What is the rafter length on each side of the ridge?What is the city and state so I can look at snow loading?

Related Structural Engineering Questions