How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask walkereng Your Own Question

walkereng
walkereng, Consultant
Category: Structural Engineering
Satisfied Customers: 2372
Experience:  Over 30 years of Structural Engineering experience.
61772417
Type Your Structural Engineering Question Here...
walkereng is online now
A new question is answered every 9 seconds

I have a 60 inch beam that will pivot at one end. On the

Customer Question

I have a 60 inch long beam that will pivot at one end. On the other end I have a weight of 3000 pounds. I want to apply a hydraulic piston to the center of the beam and push the beam up to a 45 degreee angle. The hydraulic piston is positioned at a 90 degree to the beam. How much force does the piston have to apply?
Submitted: 12 months ago.
Category: Structural Engineering
Expert:  walkereng replied 12 months ago.

i

Expert:  StructuralEng replied 11 months ago.

Hello. Do you still need help with this question?

Related Structural Engineering Questions