How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask StructuralEng Your Own Question
StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6871
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

Want to build box beam to support flat roof Span will be

Customer Question

Hi want to build box beam to support flat roof Span will be 6metres
Submitted: 1 year ago.
Category: Structural Engineering
Expert:  StructuralEng replied 1 year ago.
Out of what do you want to build it?
Customer: replied 1 year ago.
Timber and ply box beam say 300mm deep and 100mm wide Ply would be 22mm thick
Customer: replied 1 year ago.
Hello?
Expert:  StructuralEng replied 1 year ago.
I apologize for the delay. Designing a box beam with plywood and lumber is time consuming. I can offer this as an additional service. I will submit the offer and if you accept I will provide the information by tomorrow at 11 pm EST
Expert:  StructuralEng replied 1 year ago.
I just noticed the offer didn't go through previously. I just submitted it again and it looks like it went through now.
Customer: replied 1 year ago.
Thanks but no thanks Thought it was a scam just satisfied myself it is

Related Structural Engineering Questions