How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Computer Expert
Category: Software
Satisfied Customers: 16555
Experience:  CISCO certified computer and networking expert
30970729
Type Your Software Question Here...
Pete is online now
A new question is answered every 9 seconds

I,m trying to load factory presets into kong t 3 and getting

Customer Question

I,m trying to load factory presets into kong t 3 and getting data error. Screen says
Initialize... I changed battery 2032 lithium...
Thanks
Submitted: 11 months ago.
Category: Software
Expert:  Pete replied 11 months ago.
Hi Lewis,The Korg T3 needs two things to effectively load the factory presets.First, you need to have working Flash RAM memory installed.Secondly, you need to have a working floppy disk drive.In most cases, a faulty disk drive is to blame - you will need to try swapping in a replacement disk drive to see if that helps.

Related Software Questions