How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1258
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

Trying to remove left hand side snow Augers, they are bent.

Customer Question

Trying to remove left hand side snow Augers, they are bent. Removed bearing end caps and split center gear assembly but cannot seem to get it apart further.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just started yesterday
JA: Do you have fuel in the tank? If so, is the shut-off valve open and the fuel clean?
Customer: yes
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: No
Submitted: 5 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 5 months ago.
Hi my name is ***** ***** welcome to Just Answer. To remove the auger the front whole housing has to be removed. Then the bolt and pulley that turns the in peller and auger . Then the 2 side caps and the impeller and auger assembly will come out