How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1198
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

My toro t25 is not getting gas, gas in the tank gas in the

Customer Question

My toro t25 is not getting gas, gas in the tank gas in the line
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: It was running, rpm slowed down then it stalled and that was it would not restart plug dry
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Fuel in the primer seems like fuel to carb but not to the engine
JA: Can you guesstimate how old the engine is? And has it done anything like this in the past?
Customer: 2012, maybe 50 hours on it first time
Submitted: 15 days ago.
Category: Small Engine
Expert:  Briggs-Fan replied 14 days ago.

HI my name is ***** ***** welcome to Just Answer. When you push the primer does it still push in or is it tight ?

Customer: replied 14 days ago.
It still pushes in and there is gas in the primer. Not tight
Expert:  Briggs-Fan replied 13 days ago.

How old is the gas your using

Customer: replied 13 days ago.
It's new, a week old, been using the blower all summer
Expert:  Briggs-Fan replied 13 days ago.

It sounds like the screen inside the carburetor could be clogged.

Customer: replied 12 days ago.
Ok, I'll take the carb off and try that. Thank you
Expert:  Briggs-Fan replied 12 days ago.
Ok , it's a metal screen in the middle of the carburetor