How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26283
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 1999 exmark and the drive link shaft in the wheel

Customer Question

I have a 1999 exmark and the drive link shaft in the wheel motor broke
Old ross motor
I know the part is also same.and toro has a part number for.it
Found it b UT lost paper I wrote.it on
Now cant.find any info on it or where I found it
Any help
It was a toro part and only 180.00
Submitted: 2 months ago.
Category: Small Engine
Expert:  Curtis B. replied 2 months ago.

Welcome to JUST ANSWER small engines, let me try to help you !! I don't know it all, but maybe together we can get you a satisfactory answer!

Expert:  Curtis B. replied 2 months ago.

Just quick search brings up some motors, and a used one on Ebay? Do you have numbers on your motor?

Customer: replied 2 months ago.
I see the motors new and used on ebay
I am looking for the drive link shaft that is inside the motor. Not a full motor
I can get you the motor number but I have searched Internet for days.
The part is listed with toro but I lost the part number I found in only one answer page on internet somewhere. Dealers can't figure it out either but it is a valid toro part that can be ordered for around 175.00
Expert:  Curtis B. replied 2 months ago.

That's why I thought a used one may have a shaft you could use. Less than a new shaft!