How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bill McCusker Your Own Question
Bill McCusker
Bill McCusker, Mechanic
Category: Small Engine
Satisfied Customers: 55
Experience:  Mechanic at Rhode Island Harvesting Co
96417199
Type Your Small Engine Question Here...
Bill McCusker is online now
A new question is answered every 9 seconds

How do you install a new on a 862LE Model 38622 Serial

Customer Question

How do you install a new carburetor on a 862LE Model 38622 Serial###-##-####
Submitted: 6 months ago.
Category: Small Engine
Expert:  Bill McCusker replied 6 months ago.
Hello welcome to just answers.. My name is***** see if we can solve this together. Please give me a min to open the service manual
Expert:  Bill McCusker replied 6 months ago.
If you look at your snow blower where your key and choke is the piece of metal the key goes in is held on my 4 screws. You have to remove the key the plastic choke knob the piece of metal is held on by 4 screws.. I will try to send u a pic
Expert:  Bill McCusker replied 6 months ago.
In the pic number 335 is the cover you need to remove to get to the carb.. Then there two screws that hold on the carb
Customer: replied 6 months ago.
The picture I just got does not show the entire carb. and the brackets on the carb.
Expert:  Bill McCusker replied 6 months ago.
If you look at the pic number 380 is the carb.. Im not sure what backet you need but I'm gonna assume you are talking about 364 in the picture the one the mounts to the side of the carb right??
Customer: replied 6 months ago.
The picture you are sending is way to small and I don't have a full view.Sorry
Expert:  Bill McCusker replied 6 months ago.
Sorry for the small pic go to this site and you might be able to see it better.
https://www.partstree.com/parts/toro/snow-blowers-snow-throwers/38622-826-le-toro-power-max-826-le-snowthrower-sn-280000001-280999999-2008/engine-assembly-no-1-tecumseh-lh318sa-156563h/
Customer: replied 6 months ago.
Once again the picture you are sending me is to small and I can't enlarge it .I can't see the entire picture.
Expert:  Bill McCusker replied 6 months ago.
I will try to send a bigger one later tonight or tomorrow
Expert:  Bill McCusker replied 6 months ago.

I think this might be better.. the blue is the bracket i think you are trying to do.. the red circle is your carb

Customer: replied 6 months ago.
On my snow blower in front of the engine there is a bracket that the link throttle goes to and there is another link which I can't seem to fine a location for it to go as it look lie it come from the throttle switch.
All pictures only show the one link and not the second.
Expert:  Bill McCusker replied 6 months ago.
Can you take a picture and send to me?