How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 8456
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

My chamberlain 550 sn2543A01882 died after being jammed

Customer Question

my chamberlain 550 sn2543A01882 died after being jammed please help
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: one week
JA: Do you plan on doing the work yourself?
Customer: Im going to try but IAM 74 and 100& disabled
JA: Anything else we should know to help you best?
Customer: maybe after your response
Submitted: 1 month ago.
Category: Small Engine
Expert:  Wayne replied 1 month ago.

Hi I'm Wayne

I will help you with this

if it jammed the motor safety popped,

it is automatic reset, after it cools down for 30 min, it will reset,

if it does not, the logic board burned out ,the cost of that

is $92.00, not worth investing in it

I hope this helped you

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Customer: replied 1 month ago.
is there a manual reset on the motor also do you know where I can get the circuit board and where is the board pert number is located thanks mark s
Expert:  Wayne replied 1 month ago.

Hi Mark

No, the motor does not have a manual reset , it is built into motor Auto

The P/N is on your logic board , need to remove the back where the

wires are hooked and switches are

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Expert:  Wayne replied 1 month ago.

Morning

Just following up with you

did my answer help you

let me know, Please

Wayne