How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12172
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a leak and possible bad bearing in the worm gearbox

Customer Question

I have a leak and possible bad bearing in the worm gearbox (7006-2191) of my BX2750D snow blower. I have disassembled the blower and removed the gearbox and drive shaft but I cannot separate the two half's. I would like to obtain the maintenance but can't find it anywhere. Or just info on disassembling the gearbox.
Any help would be greatly appreciated.
Submitted: 13 days ago.
Category: Small Engine
Expert:  Bill McCusker replied 9 days ago.

Hello Welcome to just answers. My name is Bill..

Im gonna send you a few pictures.. that are parts break downs..

You have to remove the auger from the housing..

once you get the auger out then you can take apart the gear box..

If you look at picture 1 you have to remove number 15 bolts and 23 to take the auger out of the housing.

once you have it out you can remove the auger number 11-10 with just a shear bolt..

once you get them off.. you can look at picture 2 this is the gear box

Related Small Engine Questions