How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 8774
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

I need to adjust the for a 1000 watt robot generator 2

Customer Question

I need to adjust the carburetor for a 1000 watt robot generator 2 cycle
JA: What's the make and model of the generator? And can you guesstimate how old it is?
Customer: 2008 engine #1E45F080400511
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no
Submitted: 4 months ago.
Category: Small Engine
Expert:  Wayne replied 4 months ago.

Hi I'm Wayne

I will help you with this

will it start and run ??

Customer: replied 4 months ago.
Customer: replied 4 months ago.
Isn't ideling properly
Customer: replied 4 months ago.
I'm messing with the acres now and can change the idle speed but can't seem to get it right
Customer: replied 4 months ago.
idle
Customer: replied 4 months ago.
Sorry messing with the screws
Expert:  Wayne replied 4 months ago.

Thank you for that

with it idling engine hot

turn the screws in until it starts to miss, then back out the screw 1/2-3/4 turn

I hope this helped you

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Customer: replied 4 months ago.
Done that. Still not roght
Customer: replied 4 months ago.
Right
Expert:  Wayne replied 4 months ago.

Thank you for that

you may have dirty jets,,that what it sounds like

get a bottle of SEA Foam at auto/Hardware store

add 2-3 oz to the gas tank and run with the choke

part on, this will suck it thru to clean it

I hope this helped you

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE