How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12172
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a craftsman 2700psi power washer model 580.752 520,

Customer Question

I have a craftsman 2700psi power washer model 580.752 520 , with briggs model 11P902-0120-B1 ,replaced needle and seat ,ran perfect first time ,2nd time ran perfect for 15 minutes then acted like ran out of gas but still had plenty in tank , now spits back out carb when crank it ,pulled head ,don't see problem with valves ,is there a problem with plastic cam lobes or the compression release on the cam ,thanks Dwayne
Submitted: 22 days ago.
Category: Small Engine
Expert:  Curtis B. replied 22 days ago.

Welcome to JUST ANSWER small engines, let me try to help you !! I don't know it all, but maybe together we can get you a satisfactory answer!

Expert:  Curtis B. replied 22 days ago.

Did you check the carburetor for water in the float bowl? It can have a bad camshaft but not the usual problem with a pressure washer.

Related Small Engine Questions