How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 515
Experience:  Husqvarna Service Tech
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Murray 425303x92a 42 need to know dive belt routing and

Customer Question

murray 425303x92a 42 need to know dive belt routing and where tenion pullys go on whitch side of belt it goes
thanks wayne
Submitted: 27 days ago.
Category: Small Engine
Expert:  JON replied 27 days ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Expert:  JON replied 27 days ago.

Tension pulley will go to the outside of the belt. If its a flat idler and will go to flat side of the belt. If it is a grooved pulley, the groove of the beltwill go on it. Pic is included.

Let me know if you need anything else as I am here for you. Please remember to RATE me as I strive to be the BEST, ***** ***** ratings help me to achieve this. 5 STAR RATING IS MY GOAL

Related Small Engine Questions