How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Barker Your Own Question
Brad Barker
Brad Barker,
Category: Small Engine
Satisfied Customers: 4
Experience:  Master Kia technician at Kia
96268722
Type Your Small Engine Question Here...
Brad Barker is online now
A new question is answered every 9 seconds

How do I fit a drive belt on a 3400. It has spat the belt

Customer Question

How do I fit a drive belt on a hustler 3400. It has spat the belt off before and i have fitted it with no problems but this time i just cannot seem to figure the correct layout.
thanks
ian
Submitted: 5 months ago.
Category: Small Engine
Expert:  Brad Barker replied 5 months ago.

https://www.hustlerturf.com/support/manuals

that is link to all service manuals for hustler did you search on the site?

Expert:  Brad Barker replied 5 months ago.

Page 13 of this manual should be what you are locking for. Manual section 4-1

Customer: replied 4 months ago.
Hi BradThanks for your reply. Sorry I haven’t answered before but I am in the middle of moving house and don’t have internet at the new house as yet.I think you have misunderstood which drive belt I am having difficulty with.It’s not the blade drive but rather its the belt that drives the pump on each drve wheel to allow forward movement and steering.ThanksIan