How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 521
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Ihave a Poulan P3314 That Won't start. What do I Hve to do

Customer Question

Ihave a Poulan P3314 That Won't start. What do I Hve to do to get it started
Submitted: 2 months ago.
Category: Small Engine
Expert:  JON replied 2 months ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Expert:  JON replied 2 months ago.

Being as you have replaced pretty much everything on this machine. What is the compression?

Customer: replied 2 months ago.
Good
Expert:  JON replied 2 months ago.

What is the PSI?

Do you have spark?

Customer: replied 2 months ago.
I don't have spark that I can detect
Expert:  JON replied 2 months ago.

how was the new coil gapped?

Customer: replied 2 months ago.
It Was gapped with afeeler guage, But I Did Not have any specs on what it should be.
Expert:  JON replied 2 months ago.

you want it to be 0.010 use a business carb to gap it. Allow the magnet on the flywheel to pull the coil to it with the carb between the 2, then tighten coil down

Customer: replied 2 months ago.
Thats my Cell Phone.
Expert:  JON replied 2 months ago.

on call currently, it will be a few moments

Customer: replied 2 months ago.
How long will it to get an answer
Expert:  JON replied 2 months ago.

Stated payment failure, will not allow the call to process