How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 521
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Why when you pull starter cord isnaps back very hard

Customer Question

why when you pull starter cord isnaps back very hard
Submitted: 2 months ago.
Category: Small Engine
Expert:  JON replied 2 months ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Expert:  JON replied 2 months ago.

usually it is due to a sheared flywheel key, but since you have replaced this already.... What machine is this ?

Customer: replied 2 months ago.
sears###-##-#### 20 " serial 02099 engine(###) ###-####720 serial 2341A
Expert:  JON replied 2 months ago.

Check that the blade is good and shaft is not bent

Customer: replied 2 months ago.
no blade on it
Expert:  JON replied 2 months ago.

if no blade is on it that will cause kick back

Expert:  JON replied 2 months ago.

need blade to balance out shaft

Customer: replied 2 months ago.
how long can i talk about this ill have to put blade back on and try it
Expert:  JON replied 2 months ago.

that will be fine, I will be here