How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26034
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Tecumseh H60-75505R and i am trying to figure out

Customer Question

Hello, i have a Tecumseh H60-75505R and i am trying to figure out the correct throttle/Governor linkage setup and how to set the governor
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: I bought the tiller with no linkages
JA: What's the make and model of the tiller? And can you guesstimate how old it is?
Customer: It is a 1987 troy bilt econohorse
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: I bought the linkages in the parts diagrams that i could find but the throttle gets sucked full open whenever i start the engine.
Submitted: 2 months ago.
Category: Small Engine
Expert:  Curtis B. replied 2 months ago.

Welcome to JUST ANSWER small engines, let me try to help you !! I don't know it all, but maybe together we can get you a satisfactory answer!

Expert:  Curtis B. replied 2 months ago.

See service manual link below, starting with page 26 , for the governor linkage.

Customer: replied 2 months ago.
ok, I believe that i have the correct parts, however ther are no springs that i can find
Expert:  Curtis B. replied 2 months ago.

oK, did you down load the manual? Springs cn be universal, if you can determine where to add spring. Lowes and Home Depot carry assortment of springs.

Customer: replied 2 months ago.
I did download the manual but the diagram that looks like my setup doesnt show any springs. I have been searching the internet for week trying to figure out where to put one
Expert:  Curtis B. replied 2 months ago.

Typical spring location is to apply tension against the governor link.

Customer: replied 2 months ago.
in which direction? Should the spring be trying to open the throttle or close it?
Expert:  Curtis B. replied 2 months ago.

Close it.

Expert:  Curtis B. replied 2 months ago.

I see question is still open.??