How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a M#13WX90AS009 S#1D081H30033, A while...the unir has

Customer Question

Hello...I have a M#13WX90AS009 S#1D081H30033
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: A while...the unir has 54 hours...stored a long time. Both upper beltd replaced. Slips on hills and won't pull grades.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No.
Submitted: 3 months ago.
Category: Small Engine
Expert:  JON replied 3 months ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Customer: replied 3 months ago.
Are you waiting on me?
Customer: replied 3 months ago.
What more are you needing?
Expert:  JON replied 3 months ago.

if both belts are new, I would check that the pulleys are working properly. check the inside grooves for smoothness and also shiny grooves as this would allows belt to be slipping in pulley. Check that the idler pulleys are all properly installed and moving when supposed to as well

Customer: replied 3 months ago.
Already did that.
Expert:  JON replied 3 months ago.

I will OPT OUT as if you have new belts and all pulleys are good, belt is routed properly, there is no reason for machine to slip going up hills. Please DO NOT respond as t will lock question back to me and another expert cannot answer for you

Customer: replied 3 months ago.
Send me to coustomer service, because this advise was useless
Customer: replied 3 months ago.
I wish to dissolve the agreement.... I will seek information elsewhere.