How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 521
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

I have a troy built zero turn, i cant get the blades to stop

Customer Question

i have a troy built zero turn, i cant get the blades to stop turning. the switch appears to be working fine. Any ideas
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: just started yesterday
JA: Do you have fuel in the tank? If so, is the shut-off valve open and the fuel clean?
Customer: the engine runs fine, only he blaades will not stop
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no
Submitted: 3 months ago.
Category: Small Engine
Expert:  JON replied 3 months ago.

Hi, my name is ***** ***** me review the issue, and I will be more than happy to help resolve it as quickly as possible.

Expert:  JON replied 3 months ago.

If your blades are not stopping it is most likely due to the electric clutch is not shutting down fully (new clutch would be needed) or brake pads for pulleys, which your machine most likely doesn't have, so I would say it is the clutch.

What is model and serial number of this machine?