How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1797
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Trying to remove clutch from a craftsman weedwacker, have

Customer Question

trying to remove clutch from a craftsman weedwacker, have the housing off
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: 10 minutes
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: Trying to remove clutch so I can remove casing to access the recoil as it is not recoiling
Submitted: 3 months ago.
Category: Small Engine
Expert:  Donald replied 3 months ago.

Hello. Thank you for choosing Just Answer. My name is***** will be happy to assist you.

Expert:  Donald replied 3 months ago.

There is a torx screw in the center of your clutch. You will need a torx bit, or a torx screwdriver, in order to remove it.

Expert:  Donald replied 3 months ago.

Please take a look at the video above. The engine in the video is not a Craftsman, but the process for removing your clutch is the same.

Expert:  Donald replied 3 months ago.

We can continue from here.

Customer: replied 3 months ago.
how do we continue ? I sent photo of clutch
Expert:  Donald replied 3 months ago.

I am here. I do not see your photo. Did you watch the video in the link above?