How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14436
Experience:  Certified on Onan and Generac generators
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I'm looking for a slip ring for brush to run on and 2 brush.

Customer Question

I'm looking for a slip ring for brush to run on and 2 brush. Year 1989 Kohler generator with a diesel yanmar engine. Model 12.5 CCO, serial#232726, spec#135013.
Brush #239282
It is in a 1989 blue Bird Wanderlodge
Thanks Alex
Submitted: 2 months ago.
Category: Small Engine
Expert:  Hank F. replied 2 months ago.

Hello, my name is ***** ***** I am going to assist you with this.

Are your slip rings so bad that they can not be turned?

Expert:  Hank F. replied 2 months ago.

The part number for the slip rings is 359447.

If you install new slip rings, you need to replace both brushes. Never install an old brush on new slip rings.

When replacing the brushes, it is highly recommended to also install new brush springs, part number GM6053.

All parts can be ordered through your nearest Kohler distributor.

You can find your nearest distributor at this link: