How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26044
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My i1050 is slow and stops going sharp right or left and

Customer Question

Hello my i1050 is slow and stops going sharp right or left and going in reverse very slow can you help thanks
Submitted: 3 months ago.
Category: Small Engine
Expert:  Curtis B. replied 3 months ago.

See link above, the tractor has a single belt for both transmission drives. Is the belt tight? Has it ever been replaced?

Customer: replied 3 months ago.
new belt put on yesterday
Expert:  Curtis B. replied 3 months ago.

Is the belt tight? It should be tight enough that it will not slip on the pulley. # 37 spring on the idler is the tensioner.

Customer: replied 3 months ago.
The belt is tight
Expert:  Curtis B. replied 3 months ago.

Is forward ok? Just won't steer right/left, and reverse?

Customer: replied 3 months ago.
forward is ok
Expert:  Curtis B. replied 3 months ago.

OK, Let me opt out and see if anyone else has seen this. Please do not respond to me or it will lock the question. Sorry.

Customer: replied 3 months ago.
Well been over 24hrs with no response, this is a ripoff change $18 to tell me my belt is loose