How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 521
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

14hp Vertical shaft Spec No: 21524 Removing fly wheel from

Customer Question

14hp Vertical shaft Spec No: 21524
Removing fly wheel from crankshaft.
Submitted: 3 months ago.
Category: Small Engine
Expert:  JON replied 3 months ago.

Hi, my name is ***** ***** welcome to JustAnswer.com. I will be happy to assist you today. Give me a few moments to look over your problem, and I will get right back to you so we can fix the issue and get your machine back to working order

Expert:  JON replied 3 months ago.

From here you will want to apply pressure to the backside and reinstall the nut on shaft. screw nut even with top of shaft. Hit the nut with a hammer while applying pressure to back side of flywheel.

I am assuming you do not have a puller to do this.....

Make sure not to pry against a small part as this can break engine.

Expert:  JON replied 3 months ago.

Just checking in to see if you need any more assistance. Let me know if I can do anything else. Please remember to rate me as I strive to do my best and your ratings help me achieve this

Expert:  JON replied 3 months ago.

Just checking in to see if you need any more assistance. Let me know if I can do anything else. Please remember to rate me as I strive to do my best and your ratings help me achieve this