How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14730
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I'm working on a 2014 Onan generator in a Georgetown coach I

Customer Question

I'm working on a 2014 Onan generator in a Georgetown coach I remove the generator to change insulation which was laying on the exhaust installed it now it will not stay running when you push the button to start Twitter check the oil pressure switch it seems okay it has continuity when motor is not running and has no continuity when the motors running I took it back out to look for other wires that I did not connect I cannot find anything wrong
Submitted: 9 months ago.
Category: Small Engine
Expert:  Hank F. replied 9 months ago.

Hello, my name is ***** ***** I am going to assist you with this.

You most likely have overlooked a wire that came loose. Check the brush leads first - they would be the easiest to over look.

If it is not them, what is the model number of the genset?

Expert:  Hank F. replied 9 months ago.

Did you find the problem?