How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14532
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

Generac 8000e GP unit. The electric start switch does not

Customer Question

Generac 8000e GP unit. The electric start switch does not crank the engine. Starts on first pull with recoil starter, no problem. Replaced battery. Still nothing. Placing the switch in "run" position to start with recoil - no problem at all. Is there a fuse I can check?
Submitted: 5 months ago.
Category: Small Engine
Expert:  Hank F. replied 5 months ago.

Hello, my name is ***** ***** I am going to assist you with this.

No, there is no fuse in the starting system of this genset. The only fuse is for the battery charge system.

Customer: replied 5 months ago.
Still looking for direction on what I can do to correct the problem with the switch. What else can I check? All battery connections are tight. No corrosion anywhere.
Expert:  Hank F. replied 5 months ago.

Make sure you have power getting to the switch, and that the switch is actually working.