Small Engine Troubleshooting Problems? Ask a Mechanic Now.
Hi I'm Wayne
I will help you with this
sitting in the seat position, On the right hand side front of the engine just inside the intake manifold you will see the valve breather assembly. You will see the two plug wires coming out along side this breather, You will see a screw sticking out with a black wire connected to it. This is the kill wire, Disconnect it then check for spark again, If you still don't have spark the problem is the module (coil) and needs to be replaced. Adjust the air gap (distance between the coil and flywheel) to .010-.014" I use a standard business card which is .010" .
I hope this helped you
Hi if this helped you
Please rate my answer 3 or more stars
If need more info use the info button
Not Poor/Bad service
Just a follow up with you
did my answer help you
let me know, Please