How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 828
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

HZS18483BVE clutch to engine belt slipping

Customer Question

HZS18483BVE clutch to engine belt slipping
Submitted: 10 months ago.
Category: Small Engine
Customer: replied 10 months ago.
i see there is a tenstion but its not connected where dose the clutch ilde spring connect to
Expert:  JON replied 10 months ago.

Normally the clutch idle springs pull to frame on these mowers. check around the frame with-in distance and see if you see a hole or slot that looks worn

Expert:  JON replied 10 months ago.

I believe it is on the left side if you are at rear of machine facing forward

Expert:  JON replied 10 months ago.

diagram if it helps

Customer: replied 10 months ago.
Where dose spring 22 connect
Expert:  JON replied 9 months ago.
One side goes to the arm, the other hooks to frame
Customer: replied 9 months ago.
Thanks
Expert:  JON replied 9 months ago.

Let me know how repair goes and if you need anything else.

Customer: replied 9 months ago.
Got it working thanks
Expert:  JON replied 9 months ago.

GREAT! glad you are got it going. Please remember to RATE me as I strive to do my BEST, ***** ***** ratings help me to achieve this. Let me know if I can do anything for you