How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14440
Experience:  Certified on Onan and Generac generators
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

Where do you connect your pressure gage to when testing new

Customer Question

where do you connect your pressure gage to when testing new line (natural gas)for leaks
on a generac standby generator?
Submitted: 3 months ago.
Category: Small Engine
Expert:  Hank F. replied 3 months ago.

You don't use a gauge for testing for leaks. You use a soapy water solution at every joint.

You only use a gauge for testing for proper pressure at the test port of the demand regulator, to ensure proper pressure is getting to the genset.

Related Small Engine Questions