How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 581
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

How to replace hydro drive belt, vantage 2011 36

Customer Question

How to replace hydro drive belt, vantage 2011 36
Submitted: 8 months ago.
Category: Small Engine
Expert:  JON replied 8 months ago.

Not sure exactly what info you are needing. It is hard to explain how to change a belt via typing. What is it you are having an issue with? Do you need a diagram? You should be able to slide belt over both pump pulleys. You will need to remove tensioner spring install belt around front pulley, and then re-install tensioner spring to tighten the belt. Let me know if there is something I am missing that you are needing info on.

Expert:  JON replied 8 months ago.

You will need to drop clutch down to install the drive belt on the top engine pulley. It is easier to drop clutch down, than move everything that is in the way, but it is your choice. Let me know if you need anything further.

Related Small Engine Questions