How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2760
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

I installed a spark plug, new primer bulb, and repaired

Customer Question

I installed a spark plug, new primer bulb, and repaired wires going to stop switch. the model T260 will not start. what could the problem be?
Submitted: 3 months ago.
Category: Small Engine
Expert:  Vince O. replied 3 months ago.

Hello, did you check for spark? If there's spark spray a little carb cleaner directly into the carb and see if it fires. If it starts and quits you most likely have a carb problem and it needs removed and cleaned. If it doesn't fire give a compression test, should be around 110-120 psi.

Related Small Engine Questions