How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1766
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Do I need to take the blade operating belt off to change the

Customer Question

do I need to take the blade operating belt off to change the drive belt. and which direction should I start from motor end pulley or front to back
Submitted: 3 months ago.
Category: Small Engine
Expert:  Donald replied 3 months ago.

Hello. Thank you for choosing Just Answer. My name is***** will be happy to assist you. Do you have the model numbers for your mower? I would like to pull up a diagram of your mower.

Expert:  Donald replied 3 months ago.

Yes, you will need to remove your blade operating belt, in order to slip your drive belt over your pto clutch. You will also need to disconnect the wiring connector from your pto clutch.

Expert:  Donald replied 3 months ago.

In the link above, you will see a routing diagram for your drive belt. You and I can continue from here. Thanks!

Related Small Engine Questions