How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2774
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
32407143
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

I am replacing the drive engage lever on a Craftsman self

Customer Question

I am replacing the drive engage lever on a Craftsman self propelled lawn mower and to insert new cable ot has to come apart. So it fell apart and the spring that holds the run lever doesn't fit back in the same way it fell out. No tension against the handle when you pull it back. Can you help?
Submitted: 7 months ago.
Category: Small Engine
Expert:  Vince O. replied 7 months ago.

Hello, what is the model number from the sticker?

Customer: replied 7 months ago.
Expert:  Vince O. replied 7 months ago.

Here is a short video that might help. https://www.youtube.com/watch?v=MdEdvTjRnhQ