How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 526
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

I have a 2006 Troy Built tractor Model 13Bx60TG766 tractor,

Customer Question

I have a 2006 Troy Built tractor Model 13Bx60TG766 tractor, the bottom steering support bracket shaft bearing hole is all worned out. Any way to fixit without removing the support plate
Submitted: 6 months ago.
Category: Small Engine
Expert:  JON replied 6 months ago.

There is no way to repair this w/o pulling apart as far as I am aware. This is a job one stays away from if they can help it. Sorry, I have nothing but bad news. Let me know if I can help further

Expert:  JON replied 6 months ago.

Just checking in to see if everything went well. If you need anything else, please let me know, as I am here to help. Please remember to RATE me as I strive to be the best and help all I can, and your ratings help me achieve this.

Customer: replied 6 months ago.
I have rate u at a 0 because after i tore it all apart I found that I could had knocked out the bushing after removing the gear. I cancelled my membership and want all fees refunded!