How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 522
Experience:  Husqvarna Service Tech
94737911
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Put a new drive belt on my SS5000 zero turn, but wont move

Customer Question

put a new drive belt on my SS5000 zero turn , but wont move when arms are engaged , or moves very slowly. Drive belt is spinning. Any ideas?
Submitted: 4 months ago.
Category: Small Engine
Expert:  JON replied 4 months ago.

It the belt on the idler/tensioner pulley correctly. How much play is in belt when not engaged

Customer: replied 4 months ago.
spring tension constant, less than half inch play
Expert:  JON replied 4 months ago.

Pump Levers pushed in, in the rear . What was the part number of the belt used? If belt is turning, and pump levers are pushed in, mower should move

Customer: replied 4 months ago.
it shows levers are to be out when engaged , in when you want to be in neutral
Expert:  JON replied 4 months ago.

If levers are in the proper position for riding, I would check belt routing and/or belt size.

Customer: replied 4 months ago.
ok,thanks jon
Expert:  JON replied 4 months ago.

I am pulling the diagrams to see a visual now.

Expert:  JON replied 4 months ago.

Double check that the Brake box is disengaging fully also.

Expert:  JON replied 4 months ago.

What belt number was installed. I see many of these as I am a Toro Dealer, and it is normally the belt size, or levers not disengaging fully.

Expert:  JON replied 4 months ago.

Just checking in and seeing if you need anything else as I see I didn't get rated and wasn't sure if you needed more info. Rating are important and I strive to do my best. please let me know if I can assist furher