How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 25672
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Model 020207 pressure washer rebuilr carb. how do i

Customer Question

model 020207 pressure washer
rebuilr carb.
how do i reconnect link mechanical governor part 34691829
cant seem to get it right
Submitted: 3 months ago.
Category: Small Engine
Expert:  Curtis B. replied 3 months ago.

Engine is not identified by the Troy bilt model number, but picking a typical Briggs engine on a washer, here is link showing the carburetor removal, see it it identifies the link locations. See the link above. Thanks,

Customer: replied 3 months ago.
pix not clear. i need tosee how to relink "link mechanical governor" after rebuilding carb.
the arm goes in the little hole w/ the plastic washer, right? how does the black arm at the link connect?
Customer: replied 3 months ago.
the link mech gov is PART(###) ###-#### ***** 34691829
Expert:  Curtis B. replied 3 months ago.

I don't have your engine number, but here is another.

Customer: replied 3 months ago.
ENGINE # ***** F1 04063059
Expert:  Curtis B. replied 3 months ago.

Go back to the link above, it is the correct one! Are you on smart phone? Pictures are very clear on computer screen! It shows all the linkage connections!

Related Small Engine Questions