How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14484
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I have a Onan 4.0 BF-3GR/16000b. I would like to use it on

Customer Question

I have a Onan 4.0 BF-3GR/16000b. I would like to use it on my ranch service truck. I want to hook it to a 120/220v sub panel wit one 220v 30a and one 120v 20a brakers feeding utility plugs. Where woul I pull the niter all from?
Submitted: 4 months ago.
Category: Small Engine
Expert:  Hank F. replied 4 months ago.

I don't know what a "niter" is, but to do what you want, you need to make ssure the genset is properly configured for 240V, and run it into the sub panel.

You would get your 240 across both hot legs in the panel, and your 120 from a single hot leg and neutral.