How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a kohler courage 18 hp. we have had to rebuild the

Customer Question

I have a kohler courage 18 hp. we have had to rebuild the engine and now find the air filter pushes up on the thin rods to the carburetta. is it possible there should be a spacer holding the air filter 5mm out ?
Submitted: 4 months ago.
Category: Small Engine
Expert:  JON replied 4 months ago.

What do you mean by thin rods to carb? The bolts that hold the carb to intake, and then the air filter part mounts to?

Expert:  JON replied 4 months ago.

what are the four numbers after SV540-XXXX