How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27828
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Generac pressure washer with a 6 hp Briggs and

Customer Question

I have a Generac pressure washer with a 6 hp Briggs and Stratton. I put a new carb on it, and it fires, but will only run with the choke 3/4 engaged. When I take the choke off it dies. Is there a carb adjustment I need to make?
JA: What's the make and model of the pressure washer? And can you guesstimate how old it is?
Customer: model 01042-1 Type: 5000 CP 2250 PSI. It's old, probably 10 years.
JA: Do you plan on doing the work yourself?
Customer: yes, if possible
JA: Anything else we should know to help you best?
Customer: Not that I know of.
Submitted: 11 months ago.
Category: Small Engine
Expert:  Curtis B. replied 11 months ago.

No adjustment on the carb! But have you checked the flow of fuel from the fuel tank to the carburetor inlet? And you used new fuel?