How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27137
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I rplaced the belt blades on a 48" LA145 now when blades

Customer Question

i rplaced the belt for the blades on a 48" LA145 now when blades Egaged there is clunking sound where can i get a belt diagram
Submitted: 9 months ago.
Category: Small Engine
Expert:  Curtis B. replied 9 months ago.

Here is Deere parts diagram. Blades are not timed in any way, have you checked for debris under the deck? With engine off, does the belt turn freely? Maybe a bad bearing on one of the pulleys??

Expert:  Curtis B. replied 9 months ago.

here is image from the OM manual.

Expert:  Curtis B. replied 9 months ago.

Here is the manual, the link above. Thanks.

Expert:  Curtis B. replied 9 months ago.

I see question s still open, did you find the links I sent?

Expert:  Curtis B. replied 9 months ago.

Did you find problem?