How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13160
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I HAVE A TROY BILT 2006 SUPER BRONCO THAT CAME WITH A 19HP

Customer Question

I HAVE A TROY BILT 2006 SUPER BRONCO THAT CAME WITH A 19HP KOHLER THAT WENT BAD AND WAS REPLACED WITH A BRIGGS 21HP. EVERYTHING FINE FOR YEARS, NOW STARTED STRIPPING SPLINE GEAR ON Spindle Assembly, LEFT SIDE OF MOWER DECK. PLEASE HELP, MODEL #13AX60TG766
Submitted: 11 months ago.
Category: Small Engine
Expert:  Briggs-Fan replied 11 months ago.

Hi my name is ***** ***** welcome to Just Answer. Did you replace the whole spindle assembly ? Have you checked the other spindle and pulleys to make sure they aren't seized ?

Customer: replied 11 months ago.
I replaced the complete spindle assembly. the other problem I forgot to mention is that it will stop pulling after it gets hot. forward or reverse
Expert:  Briggs-Fan replied 11 months ago.

That's a transmission issue , most likely it has a hydrostatic transmission

Customer: replied 11 months ago.
could it be low of fluid
Expert:  Briggs-Fan replied 11 months ago.

Possibly I'm trying to find a part number for the transmission