How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 515
Experience:  Husqvarna Service Tech
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

Toro 20016 runs too fast, forever, yes, i'm replac ing trac

Customer Question

toro 20016 runs too fast
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: forever
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: i'm replac ing trac tion cable,now
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Small Engine Technician about your situation and then connect you two.
Submitted: 3 months ago.
Category: Small Engine
Expert:  JON replied 3 months ago.

Good morning, my name is ***** ***** I will be helping you in this matter. When you say it is running too fast, are you referring to the drive system moving too fast, or the engine RPMs too fast.

Expert:  JON replied 3 months ago.

If its the drive system moving too fast, check to ensure belt is in proper place. also check that cable is not hung up someplace. Cable #(###) ###-####/p>

Before replacing cable. loosen the bolt/nut that holds cable sleeve and allow cable to slide upwards to loosen the tension on cable and see if this slows mower​. you can adjust the cable to loosen or tighten for tensions needed to move mower

Related Small Engine Questions