How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JON Your Own Question
JON, Small Engine Technician
Category: Small Engine
Satisfied Customers: 514
Experience:  Husqvarna Service Tech
Type Your Small Engine Question Here...
JON is online now
A new question is answered every 9 seconds

I have a 26hp 54" poulan pro rider. I mowed yesterday then

Customer Question

I have a 26hp 54" poulan pro rider. I mowed yesterday then washed my mower while running. Took a ride around block to dry. Then shut off. Tried to restart. It did but soon I let off clutch it died. I have forced down brake switch and it runs drives fine. But now when I pull blade engage it dies. I jumped seat switch to eliminate that. Still dies. I have taken deck off to eliminate a load/bad bearing. Still dies, dies instantly like a kill
Submitted: 3 months ago.
Category: Small Engine
Expert:  JON replied 3 months ago.

Clean the Clutch connection out and dry it good. Sounds like you may just have dirty or wet connections. I would just pull them all and clean and dry them all out.

Customer: replied 3 months ago.
Thank you
Expert:  JON replied 3 months ago.

Let me know how it works out for you. Please let me know if I can assist any further.

Related Small Engine Questions