How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14560
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I have a 20 resal with the dc2 controller. The auto cycle

Customer Question

I have a 20 resal with the dc2 controller. The auto cycle did not run today and when I opened the cover the lcd display is blank. The stop and run lights are flashing. Checked the battery and it is fully charged. Also noticed the panel is warm particularly where the cover for the tech access and breaker are located.
Submitted: 7 months ago.
Category: Small Engine
Expert:  Hank F. replied 7 months ago.

If you have good battery power to the controller, and the fuses are good, but the controller is not working, then the controller is bad.