How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask joeplow Your Own Question
joeplow
joeplow, Technician
Category: Small Engine
Satisfied Customers: 1351
Experience:  Master Trans & Engine High-Tech
17290852
Type Your Small Engine Question Here...
joeplow is online now
A new question is answered every 9 seconds

Need tips / techniques the shaft assembly from the mandrel

Customer Question

Need tips / techniques for removing the shaft assembly from the mandrel housing. one of the blades in my 46 in mower loosened and wiped the star configuration at the base of the mandrel shaft.
Thanks,
Alan
Submitted: 5 months ago.
Category: Small Engine
Expert:  joeplow replied 5 months ago.

Hi , Alan I'm lost are you wanting to replace the bearings in it ?

Customer: replied 5 months ago.
I have ordered the new shaft because the "star" that fits the blade "hole" was destroyed. I want to get the old one out. Is there an easy way to hold the shaft to turn the nut. The bearings are probably fine - will inspect when I get the shaft out.
Expert:  joeplow replied 5 months ago.

Tell you what if you do not have a air compressor just go buy like a tire store I WOULD THINK THEY WOLD DO THAT FOR FREE....SORRY FOR THE UPPER CAPS WAS ON....LOL....TAKE CARE.....PLEASE RATE MY ANSWER

Expert:  joeplow replied 5 months ago.

Just a second with a Impact gun