How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26285
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I replaced my 20hp kolher motor on my Dixie chopper with a

Customer Question

I replaced my 20hp kolher motor on my Dixie chopper with a 23hp kolher motor off a exmark turf ranger wiring plugs are different need help wiring motor to the Dixie chopper
Submitted: 6 months ago.
Category: Small Engine
Expert:  Curtis B. replied 6 months ago.

There is no easy way. Take the old motor and he harness plug, and make a diagram of where each wire goes to on the old motor. Starter switch wire, fuel solenoid, voltage regulator, ect. Then go to the new motor and identify the wires in the same matter, then splice the old plug into the new motor with the same configuration!

Expert:  Curtis B. replied 6 months ago.

I see question is still open.??