How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 25648
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I am changing the wiring harness on a Deere M-gator I

Customer Question

I am changing the wiring harness on a John Deere M-gator I purchased from the Army. What is the best way to get the wiring through the space under the floor board? There doesn't seem to room to get it through the opening.
Submitted: 4 months ago.
Category: Small Engine
Expert:  Curtis B. replied 4 months ago.

never changed one of these, but the normal procedure is to use the old harness as a way to attach the new harness and pull it through. Or pull the old harness out and drag a wire with it, to use as the means of pulling the new harness into position.

Expert:  Curtis B. replied 4 months ago.

Did you see my response?